ATEN Altusen KL0116, Руководство пользователя

Страница: 25 / 60

25
rather than Exit Auto Scan mode. With this method, you start from where
you left off once scanning resumes. On the other hand, scanning begins
from the first computer on the installation if you exit and restart. To
resume Auto Scanning, press any key or left-click the mouse. Scanning
continues from where it left off.
• While Auto Scan mode is in effect, ordinary keyboard and mouse
functions are suspended - only Auto Scan mode compliant keystrokes
and mouse clicks may be input. You must exit Auto Scan mode in order
to regain normal control of the console.
3.To exit Auto Scan mode press [Esc] or [Spacebar]. Auto Scanning stops
once you exit Auto Scan mode.
Skip Mode
Skip mode allows you to switch between computers in order to monitor
them manually. You can wait on a particular port for as long as you like—
unlike Auto Scanning, which automatically switches after a fixed interval.
To activate Skip mode, key in the following Hot Key combination:
1. Activate Hot Key mode (see page 20).
2. Press [Arrow]
[Arrow] refers to one of the Arrow keys. After pressing [Arrow], Hot Key
Mode automatically exits, and Skip Mode activates.
Once in Skip mode, continue skipping by pressing the arrow keys. You
don’t have to use the [NumLock] + [-] combination again.
While Skip mode is in effect, ordinary keyboard and mouse functions are
suspended - only Skip mode compliant keystrokes can be input. Exit Skip
mode in order to regain normal control of the console.
3. To exit Skip mode, press [Esc] or [Spacebar].
Hot Key Beeper Control
You can use Hot Keys to toggle the Beeper On and Off.
To toggle the Beeper, enter the following Hot Key combination:
2 3