Key
Power Button
Power on/off for the W02. Quick press the power key two
times, start WPS.
Type C Charging Port
The USB charger connects here.
Battery
Insert the battery to align with the batter contacts.
Reset
To perform a reset of your device, use an unfolded paper clip,
insert it into the RST pin hole, and push down for 3 seconds
then release.
SIM Card
Remove the battery cover from the back of your W02 and
remove the battery. Slide the SIM door open by pressing
down and sliding, as the image shows below. Make sure the
SIM is placed properly before pushing down and sliding the
door back up to close it.
Wi-Fi Network Name
(SSID) / Password
You can locate the SSID and
password on the device label in the
battery compartment. Use the
SSID/password to establish your
internet connection.
Setting up your W02
Turning your W01 On/Off
First, insert a compatible SIM card into your W02. Then insert
the battery and close the battery cover. To turn your W02 on,
press and hold the Power button. To turn it off, press and hold
the Power button until you see the LCD go off.
Charging your W02
To charge your device, insert the
USB Type C cable into the charging
port and plug into the charger.
