Connecting to the Internet
1.
Open the Wi-Fi settings of your device that you want to
connect to the W02.
2.
Select the SSID of your W02 from the available
network list.
3.
When prompted, enter your W02 password (located on
the device label in the battery compartment).
LCD Indicators Key
Factory Reset of your W02
You can reset your W02 to factory settings with the W02 reset
pin hole or via the Online Portal.
NOTE: Resetting your W02 will disconnect all devices
connected to your W02. All device settings including network
name and password will be reset back to factory defaults.
•
To reset from the Online Portal, click About > Backup
and Restore > Restore to Factory Defaults.
•
To reset using the reset pin hole
on the W02:
1. Make sure your W02 is on.
2. Remove the battery cover
from the back of your W02.
3. Insert an unfolded paper
clip into the Reset pin hole
and press until the W02
LCD is lit.
Reset
For more information
Please refer to your W02 User Manual for additional
information or visit the ATEL USA website Device and Support
pages at www.ATEL-USA.com.
Contact us at: [email protected]
© 2021 Asiatelco Technologies, Inc. All Rights Reserved.
