Atek MLC 420, Руководство по эксплуатации, Страница: 3 / 12

KK-MLC.010 19.02.21 Rev No:3
2
1. Connections must be completed by only authorized personnel.
2. Consider the warnings when completing the connections and using the scale.
3. Pay attention about the sensors power supply. (For TTL sensor max. 5V, for Push-Pull sensor
max. 30V). Don’t energize the scale before all connections completed.
4. Distance between sensor and control unit must be short as possible. Avoid additions except
the suitable connector unless it needs.
5. Be away the sensor cable from high power cables, contactor, engine, or inductive and
capacitive noise sources.
6. The screen cable must be connected to the earth line.
7. The magnetic tape must be away from magnetic areas.
8. The proximity of the band with comparator, magnet or similar instruments having a magnetic
effect, disrupts the working structure of the band.
9. Don’t make any connection when the scale energized.
10. Please call the service for any problem about the scale.
11. Transport and storage should be at their original packaging and an ambient temperature of -
25°C / +85°C in such a way that they will not be exposed to dust, humudity, impact, vibration,
falling or water.
12. Chemicals such as alcohol, thinner etc. should not be used for cleaning the product. The
product should be wiped with a damp cloth.
13. The product may be damaged and may become unusable if used outside of the specifications
in the user manual. In this case, the product will be out of warranty.
1.
WARNINGS