[6]
ALP94 instrument operates in 2 different modes:
Operating Mode
: Sensor reading is shown on the display
Programming Mode
: Instrument Settings are programmed.
Button Functions
1.
PROG Button
Programming Mode:
Enter the menu / Save the parameter value.
2.
ESC Button
Programming Mode:
Exit without saving
the
parameter value.
3.
LEFT Button
Programming Mode:
Change the decimal place of the parameter value.
4.
DOWN Button
Programming Mode:
Scroll down the menu / Decrease the parameter value.
Operating Mode
: Display MIN/MAX values.
5.
UP Button
Programming Mode:
Scroll up the menu / Increase the parameter value
.
Operating Mode
: Tare Button, if Tare function is programmed.
Status LEDs
6.
TARE
: ON if Tare function is active.
7.
ABSOLUTE/RELATIVE : ON if Offset value is entered.
8.
MIN
: ON if DOWN button is pressed once, and the display shows MIN value.
9.
MAX
: ON if DOWN button is pressed twice, and the display shows MAX value.
10.
OUT1
: ON if the relay at OUT-‐1 is switched.
11.
OUT2
: ON if the relay at OUT-‐2 is switched.
12.
OUT3
: ON if the relay at OUT-‐3 is switched.
In order to see Minimum(MIN) value, press DOWN ( ) button once, during operation. Minimum value
will be shown in the display, and MIN status LED will be ON. In order to see Maximum(MAX) value, press
DOWN ( ) button again, while Minimum value is shown in the display. Maximum value will be shown in
the display. MAX status LED will be ON, and MIN status LED will be OFF. In order to reset MIN or MAX
value, press to ESC ( ) button, while the value is shown in the display. In order to return to sensor
reading display, press DOWN ( ) button, while MAX value is shown in the display. MAX status LED will be
OFF, and sensor reading will be shown in the display.
3.
DESCRIPTION OF FRONT PANEL
3.1. Displaying Minimum and Maximum Values
