7
Output - 0:
Output-1:
Output-2:
Output-1:
If outmode is selected equal to “0” the outputs don’t run.
When the counting value reachs to Set-1, the OUT-1 turn
on and also reachs to Set-2, the OUT-2 turn on. Even if
the decrease down the Set values, the Outputs don’t
turn off.
Only if the RESET comes, the outputs turns off.
When the counting value reachs to Set-1 value, Out-1 turn
ON and also reachs Set-2 value, Out-2 turn ON.
Out-1 and Out-2 keeps on state in following condition:
Counting Value ≥ Set-1
Counting Value ≥ Set-2
NOTE:
It must be following conditins for all Output modes;
OFFSET ≤ SET-1 ≤ SET-2
OUTPUTS
ALC-94 Series
