Atec A590TM, Руководство по установке

Страница: 4 / 16

4
Attach the Tilt Adjustment Rod
Lay the Brackets (2) on a flat surface with the flat side laying down. Insert the Tilt Adjustment Rod (3)
into the outer hole in the side of either
Bracket (2)
as shown in Fig. 1a below.
The Handle of the Tilt Adjustment Rod (3) can be located on either side of the TV. Make sure the
Handle will be on the side of the TV you will be able to easily access the Handle. You will need to
turn the Handle to adjust the tilt angle of the TV.
Carefully push the Tilt Adjustment Rod (3) through both holes on each Bracket (2) .
Insert the Tilt Adjustment Rod Bolt (T) into the Tilt Adjustment Rod (3) and tighten with the
phillips end of the Allen Wrench (4) .
Fig. 1a
Handle
3
T
Handle
3
2
2