Atec A590TM, Руководство по установке

Страница: 5 / 16

Center the Brackets (2) vertically on the rear of the TV. Attach the Brackets (2) to the rear of the TV
using four of the
Bolts (D-M) with the proper size Washers (Q-R) as shown in Fig. 1b. Tighten using
the Allen Wrench (4) . Do not over tighten.
NOTE: IF YOUR TV SCREEN SIZE IS 60” TO 110” PLEASE FOLLOW THE
DIRECTIONS FOUND ON PAGE 6 WHICH USES THE PROVIDED SPACERS.
Do not force the bolts into the mounting holes on your TV. Do not use an electric drill to
tighten these bolts on your TV. This could damage the equipment or cause personal injury.
CAUTION: Do not place the TV face down on a hard surface when installing the mounting plate
on the TV. Placing the TV face down on a hard surface can result in equipment damage. Use a
blanket or other suitable surface.
If your TV has a straight rear, and your screen size is 55” or less, spacers are most likely not
necessary.
For correct installation, install the Brackets (2) with the hook on each bracket facing down.
D-M
Q-R
D-M
Q-R
5
Fig. 1b