Atdec TH-VWP-050 Скачать руководство пользователя страница 5

TH-VW Series Page 5 of 6

4.1 

Install the screens row by row, 

starting at the bottom. Ensure each row 
of screens is level before moving on to 
the next row.

Installation may start from left or right.

4.3 

Screen levelling

4.4 

Wall levelling

Screen shown in Landscape orientation

Screen shown in Portrait orientation

4. 

Mount Screens

Please use a 

Spirit Level 

during installation to 

ensure that the screens are 

LEVEL

Angle the screen as 
shown and position 
so the hook is above 
the bracket.

Lower the hook 
onto the bracket to 
engage, and gently 
lower the screen.

Phillips 
head screw 
driver

+/- 5mm

Level the screen by adjusting the 
screw at the top of each mounting 
bracket. Use a spirit level to ensure 
screen is level.

To adjust for uneven 
walls, screw the 
leveling bolt in or 
out to match each 
display position.

Levelling 
bolt

5. 

Cabling

Tilt up each row, starting at the top, leaving 
each screen out until all cabling is finished.  
You may start from the left or right.

5.1 

Cabling sequence

Screen shown in Landscape orientation

Screen shown in Portrait orientation

4.2 

Hang screen

Содержание TH-VWP-050







Отзывы: