TH-VW Series Page 2 of 6
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! The manufacturer accepts no responsibility for incorrect installation.
! Failure to mount this product correctly may cause serious injury/death during or following installation.
! This product should only be installed by professional installers of good mechanical aptitude, who have experience with basic building
construction, and fully understand these instructions and the consequences of incorrect installation.
! Two person installation is recommended.
! Use mechanical lifting equipment for safe lifting and positioning of equipment where appropriate to ensure careful installation - AV
equipment is fragile and can be heavy.
! Some walls are not suitable for Video Wall installation - check load capacity of wall prior to installation. Failure to provide adequate
structural strength for this product can result in serious injury to persons or damage to equipment. It is the professional
installer’s responsibility to ensure suitable
structural capacity of wall (including appropriate safety factor) to support total weight of
all equipment being mounted.
Reinforce the wall structure and consult a structural engineer where required.
! Drilling into electrical wires can cause death - use appropriate equipment and caution when drilling holes in walls to avoid electrical
cables, water pipes and gas pipes. Do not drill into structures unless you have established it’s safe to do so.
! Ensure that the Video Wall is installed out of reach of public.
! Product not suitable for use outdoors.
! Do not use this product for mobile applications.
! After installation is complete check to verify that Video Wall is secure and safe for use.
1.
Mount Brackets to screen
OPTION A
If the distance between the
top of the display & mounting bracket
is 80mm or less, mount directly onto
the screen.
OPTION B
If the distance between the
top of the display & mounting bracket
is between 80 and 165mm, mount
using spacers included.
NOTE
To function correctly, top of the Bracket must
be mounted as close to the top of the screen as
possible - but Bracket
must not
be higher than the
top of the screen.
These considerations are to allow angle necessary to
install displays.
When mounting multiple screens the Brackets must
be mounted in exactly the same position each time
to ensure alignment.
0~80mm
80~165mm
SPACER
0~80mm
80~165mm
SPACER
2.
Mount first Wall Plate
2.2
Measure the height
between the top of the
hook to the bottom of
the screen.
X
X
Y
Y
2.1
Determine the
desired height of your
screen from the floor.
