10º - 20º
5º 15º
Loosen
TILT
(tray angle up/down)
Tighten
Loosen
Tighten
PAN
(tray angle left/right)
Allen Key
Storage
Installation Complete
Step 6.2. Insert Cable Stops
Step 7. Adjusting the Display Bracket
Ergonomic Guidelines
A.
Insert Cable Stop on
one edge of the Pole
Slot.
B.
Press down firmly onto
the other edge of the
Cable Stop and hold.
This allows the rear profile
to flex in place.
Many experts believe that the extended use of any computer screen has the potential to cause serious injury to your eyes,
neck and back. This can be largely avoided by correctly positioning your display.
Viewing angle:
Ergonomists recommend that the optimal position
of your display should be slightly below eye level. When looking at
the display’s centre the user should have a downward visual angle
of approximately 10°-20°.
Height:
As a guide, the height
(h)
of your display should
approximately be as follows:
- Tall Male (Max): 560mm (22”)
- Short Male (Min): 368mm (14.5”)
- Tall Female (Max): 520mm (20.5”)
- Short Female (Min) 356mm (14”)
Distance:
For visual comfort, a viewing distance
(d)
between
500mm (20”) to 750mm (29.5”) is recommended.
Tilt Angle:
Angular adjustments to reduce reflection on your
monitor should range between 5° forward tilt to 15° backward tilt.
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 13.02.14 ©
±5° Horizontal
Adjustment
±25° Tilt
Adjust the tilt angle of the Notebook Tray as
desired, locking it in position using the 5mm
Allen Key.
The height can be adjusted by unlocking
the Handgrips (see Step 7). For the optimal
position of your display, refer to the
Ergonomic Guidelines below.
