LIFT
6.2
Cable Clips and Cable Stops can be installed to further manage cables.
Please See Over.
Step 4. Install Notebook
Step 5. Adjust Height
5.1
Unlock Handgrip ensuring both Tray
and Arm Assembly are supported.
5.2
Lift/Lower Tray to the desired height.
Move both Tray and Arm assembly together.
Step 6. Cable Management
6.1
After plugging in your cables, install the Cable Covers.
A.
Insert Cable Covers up
into Lock Slots.
B.
Push Cable Covers away
from Elbow Joint to secure
in place.
Elbow Joint
‘click’
‘click’
Lock Slot
Cable Stop
Note:
After connecting the
Notebook Cables, route
them through the Cable
Management Clip on the
back of the Notebook Tray.
5.3
Lock Handgrip firmly.
Note:
Ensure enough
cable slack is given to
allow for movement.
4.1
Adjust the Support Tabs to suit the
width of the Notebook Computer ensuring
that cable ports are not obstructed.
4.2
To increase stability, use the self adhesive
Hook-and-Loop Fasteners supplied.
• Peel off the backing paper to the fasteners.
• Attach fasteners to both the Notebook Tray
and Computer.
• Ensure that each set of fasteners are correctly
aligned i.e. Hook to Loop.
Note:
If this product is in a
Multi-user environment, use
the supplied cable clip to
secure the cables to the pole.
