ATD Tools ATD2P9F, Руководство по установке и эксплуатации

Страница: 14 / 25

１４
ATD2P9F
Jun 2017
STEP 11: (Checking Operation)
See next page for detailed Operation Instructions:
1. Do not place any vehicle on the lift at this time. Cycle the lift up
and down several times to ensure carriage latches click together
and all air is removed from the hydraulic system.
2. To lower the lift, both carriage’s safety latch releases must be
manually pulled down to be released to lower lift (Fig.20).
The latches will automatically reset once the lift ascends
approximately 17” from base.
3.
If latches click out of sync, tighten the equalization cable on the
one that clicks first.
THE LIFT IS NOW READY FOR USE.
IMPORTANT!
Read Safety & Operating Information on following pages before using lift.
Safety Latch
‘Cable Pull’
Release
Fig. 20