ATD Tools ATD-3425, Руководство пользователя

Страница: 3 / 7

EXPERTS IN VACUUM PUMPS
4. User’s Manual
·
Examine the oil-level before using to make sure the oil-level is not lower than the
oil-level line in the sight glass. DO NOT RUN PUMP WITH LOW OIL LEVELS. Add
oil to bring it up to the oil level line. This pump uses high-speed vacuum oil HFVM200
or equivalent.
·
Connect the container to be pumped to the gas inlet. The hose should be short,
sealed and free of dust, dirt and heavy condensation. Check for leaks before
operating pump.
·
Take off the exhaust cap, plug in the power supply and turn the switch to the on
position.
·
Unplug the vacuum pump, remove the connecting hoses and cover the exhaust cap
and oil plug after using.
5. Cautions
·
Don’t pump flammable, explosive or poisonous gases.
·
Don’t pump gas that can corrode metals and exert chemical charges.
·
Don’t pump gas containing any dust or moisture.
·
The temperature of the pumped gas shouldn’t be over 80
℃
and the room
temperature should be around 5
℃
to 40
℃
·
Don’t use vacuum pump as a compression pump.
·
Pump cannot be run without oil
·
The operating voltage is between 110V to 115V, 60Hz. You must use a grounded