ĐŽŶƚĂŝŶŝŶŐŵŽŝƐƚƵƌĞĂďƐŽƌďĂŶƚ͕ƌƵƐƚŝŶŚŝďŝƚŽƌƐ͕ŵĞƚĂůǁĞƫŶŐĂŐĞŶƚƐĂŶĚĂŶW;ĞdžƚƌĞŵĞƉƌĞƐƐƵƌĞͿĂĚĚŝƟǀĞ
ŵĂLJďĞƵƐĞĚĂƐĂƐƵďƐƟƚƵƚĞ͘KEKdh^dZ'EdK/>͘ƵƌŝŶŐĐŽŶƟŶƵŽƵƐŽƉĞƌĂƟŽŶ͕ƚŚĞƚŽŽůƐŚŽƵůĚďĞ
oiled every 1 to 2 hours. This may be done using an in-line oiler or manually.
If done manually, proceed as follows:
1. Disconnect the tool from the air supply.
2. Place a few drops of air tool oil into the inlet.
3. Connect the tool to the air supply. Run the tool without
load for a few seconds to distribute oil through the tool.
Care and Maintenance
The tool should be lubricated daily (or before each use) with air tool oil (not included).
:
NOTE
Air tool oil is available at major hardware stores.
^ηϭϬǁĞŝŐŚƚŽŝůŽƌĂŶLJŚŝŐŚŐƌĂĚĞƚƵƌďŝŶĞŽŝů
:
NOTE
Avoid the misuse of thicker oil which may lead to reduced
ƉĞƌĨŽƌŵĂŶĐĞŽƌŵĂůĨƵŶĐƟŽŶ͘
:
NOTE
Any excess oil may be propelled from the air exhaust area
ƐŽŬĞĞƉƚŚĞƚŽŽůƉŽŝŶƚĞĚŝŶĂƐĂĨĞĚŝƌĞĐƟŽŶ͘
ϰ͘ŌĞƌŽƉĞƌĂƟŶŐƚŚĞƚŽŽůĂŶĚďĞĨŽƌĞƐƚŽƌŝŶŐƚŚĞƚŽŽů͕ĚŝƐĐŽŶŶĞĐƚƚŚĞĂŝƌŚŽƐĞĂŶĚƉůĂĐĞϰŽƌϱĚƌŽƉƐŽĨĂŝƌ
tool oil into the air inlet, then reconnect the air hose and run the tool for approximately 30 seconds to
evenly distribute the oil throughout the tool.
ϱ͘ǀŽŝĚƐƚŽƌŝŶŐƚŚĞƚŽŽůŝŶĂŚƵŵŝĚĞŶǀŝƌŽŶŵĞŶƚ͕ĂƐƚŚĂƚƉƌŽŵŽƚĞƐƌƵƐƟŶŐŽĨŝŶƚĞƌŶĂůŵĞĐŚĂŶŝƐŵƐ͘ůǁĂLJƐ
oil the tool before storage.
6. When the tool is seriously damaged or beyond repair, please dispose of properly. Recycle if possible.
Never incinerate this tool.
Содержание ATD-2106
Страница 7: ...ATD 2106...
