AXE2G4AN User Manual
www.atcom.cn
Email: [email protected]
5
Chapter 4 Software Installation
After inserting the card into the PCI-E slot and boot the server, please run the “lspci” command to
check the PCI-E bus compatibility. From the correct output, users could get the following line:
----------------------------------------------------------------------------------------------------------------------
02:00.0 Communication controller: Digium, Inc. Device b200 (rev 02)
----------------------------------------------------------------------------------------------------------------------
If users can not see the above message, please power off the server and try another PCI-E slot. If it
still does not help, please contact with
.
1.
To install asterisk and dahdi, users have to use “yum” command to install the following
prerequisite packages:
yum install -y bison bison-devel zlib zlib-devel openssl openssl-devel gnutls-devel gcc
gcc-c++ libxml2 libxml2-devel ncurses ncurses-devel
yum install update
yum install bison openssl gcc libxml2 libxml2-dev ncurses-dev
gawk
yum install sqlite3 libsqlite3-dev
2.
Download the dahdi and asterisk packages.
Attention:
Users need download the latest dahdi and asterisk packages for axe4gn/axe2g4an card from
ATCOM download center:
http://www.atcom.cn/dl_axe2g4an.html
[root@localhost src]# wget
http://www.atcom.cn/cn/download/cards/axe2g4an/libgsm-current.tar.gz
[root@localhost src]# wget
http://www.atcom.cn/cn/download/cards/axe2g4an/dahdi-linux-complete-2.6.2+2.6.2.tar.gz
[root@localhost src]# wget
http://www.atcom.cn/cn/download/cards/axe2g4an/asterisk-1.8-current.tar.gz
