AT8
AT8
AT8
AT84
4
4
40
0
0
0 Series
Series
Series
Series User
User
User
User Manual
Manual
Manual
Manual
ATCOM TECHNOLOGY CO., LIMITED
www.atcom.cn
37
5.6.
5.6.
5.6.
5.6. Tone
Tone
Tone
Tone
Set the ToneScript for each tone.
For example, MWI Dial Tone:
350@-19,440@-19;2(.1/,1/1=2);10(*/0/1+2)
Frequency1, Frequency2 ;Cadence Section1;Cadence Section2
350@-19
: Frequency1 is 350HZ at -19dBm
440@-19
: Frequency2 is 440HZ at -19dBm
2(.1/,1/1=2)
: Cadence Section length is 2s, 0.1s on, 0.1s off, with frequencies 1 and
2
10(*/0/1+2)
: Cadence Section length is 10s, always on(* means always, 0 means
never), with frequencies 1 and 2.
�
Country stands: select a country standard tone as default.
�
Dial Tone
:
Played when prompting the user to enter a phone number.
�
Outside Dial Tone
:
An alternative to <Dial Tone> usually used to prompt the user
to enter an external phone number (versus an internal extension). This is
triggered by a “,” character encountered in the dial plan.
�
Busy Tone
:
Played when a 486 RSC is received for an outbound call.
�
Reorder Tone
:
Played when an outbound call has failed or after the far end hangs
up during an established call.
�
Off Hook Warning Tone: Played when the subscriber does not place the handset on
the cradle properly.
�
Ring Back Tone
:
Played for an outbound call when the far end is ringing.
�
MWI Dial Tone
:
This tone is played instead of <Dial Tone> when there are unheard
messages in the subscriber’s mail box.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299