AT800 Series User Manual
ATCOM TECHNOLOGY CO., LIMITED
www.atcom.cn
LCD contrast
---Adjust LCD contrast ranging from 1 to 8. Default is level 5.
Backlight Time (seconds)
---Set Backlight timeout ranging from 3s to 100s. Default is
10s.
Backlight Level---
Set backlight brightness level off, low, middle, high.
Control Timer Values (seconds)
Interdigit Long Timer
---If no candidate sequences are as yet complete (as dialed), the
Interdigit_Long_Timeout applies. Default is 10s. Range: 1 – 99sec
Interdigit Short Timer
---If a candidate sequence is complete, but there exists one or
more incomplete candidates, then the Interdigit_Short_Timeout applies. Default is
3s.Range: 1 – 99 sec
Recorder Delay
---Delay after far end hangs up before recorder tone is played. 0 = plays
immediately, inf = never plays. Range: 0 – 99 sec. Default is 5s.
Recorder Time
---The time of displaying call ended. If setting recorder time to 0, it will
return to idle state immediately without displaying call ended and playing recorder tone
when call is hung up by the other side.Range: 0 – 99 sec. Default is 12s.
Date and Time
NTP
1. NTP server---Network Time Protocol. Set NTP Server, and both domain and IP
address are allowed.
2. Time zone---Choose proper time zone of the local time.
Manual
