AT800 Series User Manual
ATCOM TECHNOLOGY CO., LIMITED
www.atcom.cn
A sequence can be barred (rejected) by placing a ‘!’ character at the end of the sequence.
Thus, “1900xxxxxxx!” automatically rejects all 900 area code numbers from being dialed.
Interdigit Timer Master Override:
The long and short interdigit timers can be changed in the dial plan (affecting a specific line)
by preceding the entire plan with the following syntax:
Long interdigit timer: ‘L’ ‘:’ delay-value ‘,’
Short interdigit timer: ‘S’ ‘:’ delay-value ‘,’
Thus, “L=8, (. . .)” would set the interdigit long timeout to 8 seconds for the line associated
with this dial plan. And, “L: 8, S: 4, (. . .)” would override both the long and the short
timeout values.
After finishing, click submit to save changes. The phone will restart automatically.
Phone setting
Preference
Audio Device
Enable Speaker
---Choose yes to allow the ring tone being played in speaker when there
is an incoming call. Choose no to play ring tone is headset.
Headset Volume
----Set headset receiver volume in a conversation. Default is level 5.
Headset Input Gain
---Set headset mic gain volume in a conversation. Default is 12.
Enable Ring Tone
---Choose yes to play default ring tone in ringing state. Choose no to
disable ring tone. Incoming call will not generate a ring tone then.
LCD
