APBX IP02 User Manual
25
ATCOM TECHNOLOGY CO., LIMITED
Strip
: The number of digits that will be stripped from the front of the dialing string before the call is placed via
Selected Trunks. See example in Chapter 5.
Prepend these digits:
Allows the user to specify digits that are prepended before the call is placed via the trunk. See
example in Part 4.
Password:
Authentication for Selected Extensions before dialing out.
Outbound Extension Selection
: Select extensions which can dial out with this outbound route. In my case, only 6000
and 6001 can dial out with this trunk.
Outbound Trunk Selection:
Select trunks which calls are forwarded out through.
4.4
Make inbound calls
Go to
PBX Settings
->
Inbound Routes
, click
to add an inbound route.
Caller ID
Define the Caller ID number to be matched on incoming calls. Leave this field blank to match any or no CID info.
Special characters described in chapter 4.3 can be used here as same.
DID number
Define the expected DID number if your trunk passes DID on incoming calls. Leave this blank to match calls with any
no DID info. Special characters described in chapter 4.3 can be used here as same.
Extension
