A2X(W)/A20LTE IP Phone User Manual
ATCOM TECHNOLOGY CO., LIMITE
www.atcom.cn
21
Press
key and talk with callers by built-in Micro-phone and Speaker. If you want to
hang up, please press
key again. Switch calling or talking into handset mode by
lifting the handset under speaker mode. Press
key will switch calling or talking into
headset mode.
C. Answer by headset
Keep your microphone connected with the RJ9 headset jack, when there is an incoming call,
press
and talk with the caller. If you want to hang up, please press
again.
Pressing
can change calling or talking into speaker mode, and lifting the handset
switches to handset mode.
2.2. Make Calls
A.
Use the handset
Pickup the handset, the LCD will show the current lines (user is able to switch from line1 to
line6 by pressing the line key beside the LCD). Press soft key "Send" to dial the number.
When you hear the tones of “du~~du~~” and the phone number your dialed is being
displayed on the LCD, the phone at the side of being called should be ringing. If the called
party answers this calling, the call is established and the calling timer is started immediately.
B. Use the speaker
Press
key, the LCD will show the current lines (user is able to switch from line1 to
line6 by pressing the line key beside the LCD). Input the phone number and press soft key
"Send" to dial the number. When caller hear the tones of “du~~du~~” and the phone number
your dialed is being displayed on the LCD, the phone at the side of being called should be
ringing. If the called party answers this calling, the call is established and the calling timer is
started immediately.
C. Use the headset
