9
Programming with APP
To programme your Sun Ray Wifi with a Sun
Ray Gateway you must pair the radiator to the
Gateway. First you must activate the pairing/
discovery mode in the Gateway. Details of this
can be found in the Sun Ray Gateway instruction
manual.
Once this is done press the CONFIG button on
the radiator and use the + or - key until the RF
icon flashes. Press OK and ‘Link’ together with
an antenna icon will appear in the top right of the
screen.
Another way to pair the radiator is to press the
OK
button for 3 seconds while the radiator is in
one of the main modes (OFF, AUTO, MANUAL).
Your Sun Ray Wifi radiator is now ready to
accept programme instructions from the Gateway
(you will need to complete Sun Ray WiFI web
activation. http://control.termoweb.net
)
If the radiator has been linked to the Gateway
and for some reason communication is lost, the
Link icon disappears and the antenna
starts
flashing.
Keypad Locking (Anti-Tamper)
The keypad can be locked to prevent any
unauthorised person (children, people in public
places, nurseries, offices, hotels etc.) altering the
settings of the radiator. To lock the keypad depress
and hold the + and – buttons at the same time for
3 seconds until “bloc” appears on the screen. Any
button presses will be ignored and “bloc” will be
displayed on the screen.
To unlock keyboard, once again press and
hold + and - for 3 seconds until the word ‘bloc’
disappears.
When the keypad is locked the radiator will
still receive communications from the Sun Ray
Gateway.
Advanced Settings
To enter the advanced settings mode, press
CONFIG
while the radiator is in one of the main
modes (OFF, AUTO, MANUAL). The following
window will appear:
Now press the
CONFIG
button for 5 seconds
and C1 appears on the screen.
To select one of the three advanced settings (C1
to C3) use the +/- keys and choose the required
mode by pressing OK. The advanced settings
are:
1.
C1-> Choose ºF or ºC
2.
C2-> Choose type of control
3.
C3->
T
emperature Compensation
Degrees Fahrenheit or Celsius (C1)
Select ºC or ºF with the +/- keys and confirm
with OK button .
Type of Control (C2)
You access the setting mode control, showing the
type of control currently used. There are 4 types
of control PID, hysteresis of 0.25ºC, hysteresis
of 0.35ºC, hysteresis of 0.50ºC and hysteresis of
0.75ºC.
To change type of control press +/-. Confirm with
OK.
The screens shown are:
T
emperature Compensation
(C3)
In this mode the display will alternate between
the temperature compensation (offset) and the
measured temperature with offset applied. Alter
the offset with the +/- buttons and confirm with OK.
Temperature compensation can be adjusted up
to +/- 3ºC
Содержание WF1000 Sun Ray Wifi 1000w
Страница 11: ...11...
