ATC WF1000 Sun Ray Wifi 1000w, Инструкции по эксплуатации и монтажу

Страница: 7 / 12

7
MODE
CONFIG.
Sun Ray Wi-Fi
main
switch
The control is based on four buttons and an LCD display.
Switching ON (Master):
Once the radiator has been mounted on the wall
and correctly connected to the main electricity power
supply, press the main On-Off switch on the right
hand side of the radiator.
After around 3 seconds the screen will show various
information and the radiator is ready to operate.
Switching OFF (Master):
To switch off the radiator press the main On-Off
switch on the right hand side of the radiator. The
LCD screen will turn blank and the radiator will lose
connection with the Sun Ray Gateway.
Stand-by function:
Press the Mode/OK button until the symbol is
present as shown in the following screen.
When the radiator is in Stand-by Mode it will retain
programmes and continue to communicate with the
Sun Ray Gateway but will not heat.
To switch the radiator On again, press the MODE
button to choose programme mode or manual
mode – you will see the following screens:
Increase Decrease Mode/OK
AUTO / MANUAL /OFF
CONFIG
PROG
Programmed hours
Desired
temperature
Days of the week
Heating indicator
Radio paired icon
Current Mode
(AUTO,
MANUAL, OFF)
Sun Ray Wifi Radiator Controls
OPERATING INSTRUCTIONS