ATB AQUAmax PROFESSIONAL G, Инструкция по установке, эксплуатации и техническому обслуживанию, Страница: 23 / 56

Installation, operating and maintenance manual AQUAmax
®
PROFESSIONAL G
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-Nr.: 9060 XXXX / Stand: 08.01.2019 / Seite 23 von 56
The control system proControl
©
2
Splashproof IP 54
7-figure backlight graphic display
4 short-stroke foil keys
2 LEDs green (Operation) / red
(Error)
Separate 230V terminal space
includes fine fuses 8 x T6.3A, 1 x 1A
with replacement fuses.
Circular plug-in connectors for
PROFESSIONAL G, BASIC and
CLASSIC
Yellow = buffer
Blue = aggregate SBR (GBZ: Clearwater pump / floatswitches SBR)
Black = float switch SBR (GBZ: Compressor / sludge pump)
BASIC / CLASSIC
General and safety information
The pro
Control
©
2 control unit serves for the operation of SBR wastewater treatment plants
of the AQUA
max
®
series.
The control unit – independent of plant type – is suitable for the connection of in each case
up to two aeration units (or one aerator and one mixer), two charging, two clear water
pumps, one sludge pump, one UV-disinfection plant, one system for phosphate precipitation
and four float switches for level indication.
With employment in accordance with the intended use there are no hazards emanating from
the equipment. National applicable regulations as well as technical data are to be observed.
Should the pro
Control
©
2 be used for other purposes without the express agreement of the
firm of ATB Umwelttechnologien GmbH and/or if the following safety information is
disregarded, then this can lead to malfunctions of or defects in the plant. In this case any
liability is excluded. Modifications to the equipment are not permitted and lead to the loss of
warranty claims.
Do not operate any equipment which shows malfunctions, has been dropped or has been
damaged in any way.