29
Bluetooth
Bluetooth setup
Replace an active device
If you already have two active devices on the device list and you want to
activate a different device, you must deactivate one of the two active devices.
To replace an active device:
1. Press
MENU
on the telephone base in idle mode.
2. Press
CID
or
DIR
to highlight
Bluetooth
, then
press
SELECT
.
3. Press
CID
or
DIR
to highlight
Device list
, then
press
SELECT
.
4. Press
CID
or
DIR
to highlight the device you want to
activate without a prefix
D1:
or
D2:
, then press
OPTION
.
5. Press
CID
or
DIR
to highlight
Connect
, then press
SELECT
. The handset displays
Only BT devices in slot 1 or
2 can be ready for connection
and then a list of devices
for deactivation.
6. Press
CID
or
DIR
to highlight the device to be
deactivated, then press
NEXT
. The screen displays
Cell Phone X is deactivated and you hear a confirmation
tone. Then, the screen displays
Connecting Cell Phone Y
to the base...
(
Cell Phone X
and
Cell Phone Y
represent
the device names of your cell phones).
7. Depending on your cell phone settings, you may need to
press a key on your cell phone to confirm the connection.
When the new device is successfully activated and
connected, the handset displays
Device connected. You hear a confirmation
tone.
Note:
When connecting a Bluetooth device to the device list, all connected devices will be temporarily
disconnected until the procedure is complete. It may take up to two minutes to reconnect.
DEVICE LIST
D1:Cell Phone Y
D2:Headset X
Cell Phone X
BACK OPTION
DEACTIVATE
D1:Cell Phone X
D2:Headset X
BACK NEXT
DEVICE LIST
D1:Cell Phone X
D2:Headset X
Cell Phone Y
BACK OPTION
Connecting
Cell Phone Y
to the base...
Only BT devices
in slot 1 or 2
can be ready
for connection