![AT&T MS2085 Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/atandt/ms2085/ms2085_user-manual_2995018012.webp)
7
Plug the end of the coiled
handset cord into the
HANDSET
jack on the left
side of the telephone.
1.
Lift the kickstand as the arrows indicated below to detach it from the
console. There are seven grooves designed to hold the console in different
angles for maximum visibility. Snap the kickstand into the desired groove
until it locks into place.
2.
Install the telephone line cords and power adapter as shown below. If
you subscribe to high-speed Internet service (DSL - digital subscriber line)
through your telephone lines, you must install a DSL filter between each
telephone line cord and telephone wall jack. The filter prevents noise and
caller ID problems caused by DSL interference. Please contact your DSL
service provider for more information about DSL filters.
Option 1: To connect two 2-line wall jacks
3.
Router
Line 3/4
Line 1/2
Plug the larger
end of the console
power adapter into
an electrical outlet
not controlled by a
wall switch.
If you have DSL
high-speed
Internet service,
a DSL filter (not
included) is
required on each
DSL line.
The DSL filter
must be plugged
into the telephone
wall jack.
Plug one end of the
Ethernet cable into
the Ethernet jack
at the back of
the console.
Plug the another end of the
telephone line into a 2-line
telephone wall jack
Plug the other end of the
Ethernet cable into a router
Plug one end of the black telephone
line cord into the L3/4 jack at the back
of the console.
Plug one end of the
black telephone line
cord into the L3/4
jack at the back of
the console.
Getting started
Table/desktop installation
Plug the small end of the
console power adapter into the
power jack on the back of the
console.