17
This deskset has 32 one- and two-touch memory locations (speed dial
locations) where you can store the phone numbers you wish to dial using
fewer keys than usual. You can store up to 30 digits in each location.
You can access the first 16 locations using only the one-touch buttons. To
access the remaining 16 locations, press
LOWER
and then the one-touch
button for the desired location. You might wish to write the names or
telephone numbers of the one-touch entries on the directory card, using the
light gray spaces for the upper 16 locations and the white spaces for the
lower 16 locations.
Assign a one-touch entry
Use the following steps to program the one-touch keys.
When the deskset is idle, press
MENU
/SELECT
.
Press or to scroll to
One Touch
, then press
MENU/
SELECT
or
/SKIP
.
Press or to scroll to
Program
, then press
MENU/
SELECT
or
/SKIP
.
The screen displays
Enter Number:
Use the dialing keys to enter a deskset number (up
to 30 digits).
Press
DELETE
to delete a digit.
Press
/REPEAT
or
/SKIP
to move the cursor to
the left or right.
You can include a pause while storing a dialing
sequence that requires one during actual dialing.
Press or to choose
Add pause
, then press
MENU/
SELECT
. A
P
appears on the screen.
Store a signal for switching to temporary tone signaling. If you have dial
pause (rotary) service, this signal is required for some special services.
Press or to choose
Send tone
, then press
MENU/
SELECT
. A
T
appears
on the screen. All numbers you enter after this will send touch-tone signals
during dialing.
You can store the flash signal required by some special services as part of a
dialing sequence. Press or to choose
Add flash
, then press
MENU/
SELECT
. A
F
appears on the screen. Continue storing the number
as usual.
1.
2.
3.
4.
5.
•
•
•
•
•
Telephone operation
One touch
System Setup
Ringers
Set Date/Time
>One Touch
One Touch
View
>Program
Enter Number:
18002223111_
Select to:
Done
