AT&T MERLIN LEGEND Release 2.0 Analog Multiline Telephone Скачать руководство пользователя страница 71

Страница: 71 / 794

Programming with SPM

Step

Displav

Instructions

You see only one of the two narrow
screens. If you are working on a floppy
disk PC, you see the

GOTO HARD DISK

screen. If you are working on a hard disk
PC, you see the

GOTO FLOPPY

screen.

The filenames shown on the

GOTO

screen

are from the \Spm\backup directory (hard
disk) or the root directory of the diskette in
Drive A (floppy disk).

Highlight the name of the backup file that
you want to convert from (use the arrow
keys) and press

[

↵

If the backup file you select is in
Release 2.0 format (that is, does not need

to reconverted), you see the following
rnessage:

File has already been

converted

Press

[

↵

]

to return to the beginning of

Step 3. Select a different filename or press

[ Esc ].

If the backup file you select is not in
Release 2.0 format, go to Step 4.

The Please select file name screen

is updated to show the name of the file you
selected.

Press [

↵

]. The two screens shown in

Step 5 appear.

Using SPM

2-21

Содержание MERLIN LEGEND Release 2.0 Analog Multiline Telephone



























































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MERLIN LEGEND Release 2.0 Analog Multiline Telephone

Отзывы:

AT&T MERLIN LEGEND Release 2.0 Analog Multiline Telephone, Руководство по системному программированию, Страница: 71 / 794

Результаты поиска

Содержание MERLIN LEGEND Release 2.0 Analog Multiline Telephone

Отзывы: