AT&T MERLIN LEGEND Release 2.0 Analog Multiline Telephone, Руководство по системному программированию, Страница: 37 / 794

Programming Overview
Programming Screens
There are three types of system programming screens:
Information screens - to see what is currently programmed on the
system
Menu selection screens - to select options from a menu
Data entry screens - to enter values or to identify a specific extension or
line/trunk you want to program
Figure 1-4 shows an example of an information screen. When you select
SYS
Progam from the main menu screen (Figure 1-2), the screen shown in Figure
1-4 displays system set up information. (Your system information displays in
place of the x’s.)
System Set–up
Review and Exit
S i z e :
xxxx
Type:
xxxx
O p e r a t o r : xxxx xxxx xxxx
xxxx xxxx xxxx xxxx xxxx
E x i t
Figure 1-4. Information Screen
You cannot make changes on an information screen. Select Exit (
[ F5 ]
on the
PC) to continue to the next screen in the procedure.
An example of a menu selection screen is shown in Figure 1-5.
Screen Title
System Programming:
>
Instruction
Make a selection
System Extensions
SysRenumber Options
Operator
Tables
—
O p t i o n s
LinesTrunks AuxEquip
E x i t
NightSrvce
Figure 1-5. Menu Selection Screen
The first line of text on all screens is the screen title, followed on the second line
by a system prompt or direction about how to proceed. The remaining lines of
text vary according to the screen.
While a menu selection screen prompts you to select one of the available
options, a data entry screen prompts you to enter specific data for the
procedure, as shown in Figure 1-6.
1-10 Programming Procedures