Follow the procedure below to reallocate announcement
times:
CAUTION:
This procedure causes all announcements to
be erased.
1
Dial *49 followed by the announcement time lengths
for each announcement:
.
NOTE:
Set the time allocation to 00 for any
a
b
c
d
e
announcement that is not being used.
Two digits for the maximum time (in seconds)
allocated for the Day announcement
Two digits for the maximum time (in seconds)
allocated for the Night announcement
Two digits for the maximum time (in seconds)
allocated for the Transfer Fail announcement
Two digits for the maximum time (in seconds)
allocated for the Hold announcement
Two digits for the maximum time (in seconds)
allocated for the Connect announcement
2
Dial # to enter the command.
The two-beep confirmation tone sounds.
3
Continue programming or dial *# to exit authorized
caller mode.
4
Dial # to disconnect.
Programming Features 2-7
Содержание MERLIN II Attendant
Страница 1: ...AT T MERLIN II COMMUNICATIONS SYSTEM MERLIN II Attendant Installer s Guide...
Страница 21: ...FIGURE 1 4 Connecting the MERLIN II Attendant Connecting the MERLIN II Attendant 1 17...
Страница 33: ...FIGURE 2 2 Supervised Transfer process 2 12 Programming Features...
Страница 35: ...FIGURE 2 3 Immediate and Backup Call Handling 2 14 Programming Features...