Display Features
On/Off
The display is controlled as follows:
To turn on/off
1
Press [
Display
]
●
Green light comes on and display is on
Adjust the angle of display with the thumbwheel
on the right
●
2
Press [
Display
] again
Green light goes off and display is off
●
Normal Mode
In normal mode, the display shows call information for the current active call
appearance button:
●
You may have as many as 10 call appearance buttons. Beginning with the first
button in the upper left hand corner of your faceplate and going down the display
identifies the first 5 buttons as a through e; the 5 buttons in the second column are
identified as f through j. When the display shows [
a=
] , it represents call
information for the first call appearance button. The next button down would be
shown as [
b=
] , and so on, continuing through [
j=
] if all 10 of these buttons are
used for call appearances.
●
When you dial an extension, that number is shown and then replaced by the called
party’s name and extension.
When a call is received from another extension, the caller’s name is shown; when a
call is received from outside, [
OUTSIDE CALL
] or a trunk identifier is shown.
●
●
The display remains in normal mode until you activate one of the other display
features. After using any of these features, return to normal mode by pressing
[
Normal
].
20