AT&T DECT EL52419 Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 73

background image

61

FCC Part 15

This equipment has been tested and found to comply with the requirements for a Class B digital
device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements
are intended to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•   Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. Privacy of
communications may not be ensured when using this telephone.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency
energy that can be safely absorbed by a user or bystander according to the intended usage
of the product. This product has been tested and found to comply with the FCC criteria. The
handset may be safely held against the ear of the user. The telephone base shall be installed
and used such that parts of the user’s body other than the hands are maintained at a distance of
approximately 20 cm (8 inches)
or more.

This Class B digital apparatus complies with Canadian ICES-003.

Appendix G

«
...
64
65
66
67
68
...
»

Содержание DECT EL52419










































































Отзывы:

Нет отзывов

Похожие инструкции для DECT EL52419

-295861 - Corded Desktop CID Itad

Бренд: GE Страницы: 44

Бренд: Gamma Страницы: 20

EXAI8580 - EXAI 8580 Cordless Phone

Бренд: Uniden Страницы: 20

Бренд: Uniden Страницы: 12

Бренд: Uniden Страницы: 52

Бренд: Uniden Страницы: 27

Бренд: Xorcom Страницы: 9

Бренд: Panasonic Страницы: 68

Бренд: CEECO Страницы: 12

FREELANCE XC 1500

Бренд: BT Страницы: 2

Бренд: TATA Motors Страницы: 17

Бренд: Binatone Страницы: 2

Бренд: VTech Страницы: 38

Бренд: T-Mobile Страницы: 191

Бренд: Oricom Страницы: 25

Intenna CP-2525

Бренд: Cobra Страницы: 14

Бренд: Aastra Страницы: 16

Бренд: Curtis Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды