AT&T activeARC ARC1000MAP Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 45

AT&T activeARC ARC1000MAP Скачать руководство пользователя страница 39

35

ARC

1000MAP User’s Manual

Regulatory and compliance

The AT&T active

ARC

®

access points must be installed and used in strict accordance with the manufacturer’s instructions as described

in the user documentation that comes with the product. This product contains encryption. It is unlawful to export out of the United

States without obtaining a U.S. Export License.
This product does not contain any user serviceable components. Any unauthorized product changes or modifications will invalidate

ICC’s warranty and all applicable regulatory certifications and approvals.
Only antennas specified for your region by ICC can be used with this product. The use of external amplifiers or non-ICC antennas may

invalidate regulatory certifications and approvals.

Declaration of ROHS compliance

International Communications Corporation hereby declares that the product AT&T active

ARC

®

access point has been designed

and manufactured in accordance with Directive 2002/95/EC of the European Commission on the restriction of certain hazardous

substances in electrical and electronic equipment. (ROHS)

FCC warning

This device generates and radiates radio-frequency energy. In order to comply with FCC radio-frequency exposure guidelines for an

uncontrolled environment, this equipment must be installed and operated while maintaining a minimum body-to-antenna distance of

20 cm (approximately 8 in).

Canada warning

The radio equipment installer must ensure that the antenna is located or pointed so that it does not emit RF field in excess of Health

Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website: www.hc-sc.gc.ca/rpb.

CAUTION:

Exposure to radio frequency radiation

«
...
37
38
39
40
41
...
»

Содержание activeARC ARC1000MAP














































Отзывы:

Нет отзывов