AT&T activeARC ARC1000MAP Скачать руководство пользователя страница 14

Страница: 14 / 45

ARC

1000MAP User’s Manual

Menu/label

Sub-menu label

Description

Basic settings

Shows the IP address, hardware version, firmware version,

MAC address, and device information. The administrator

password, serial ports configuration, and

System Settings

can also be configured.

Status

Interfaces

Shows the real-time wired and wireless configuration of the

AP.

Transmit/Receive

Shows the virtual AP-enabling situation and the statistic of

sending and receiving packets of the AP.

Client associations

Shows the information of sending and receiving packets of

the terminal, which has been associated with the AP.

Advanced Configuration

Ethernet settings

Configures the related wired configuration of the AP,

including host name, management VLAN, untagged VLAN,

connection type (DHCP/Static IP selection), and DNS server.

Wireless settings

Configures the related wireless configuration of the AP,

including country code, RF switch, wireless mode, and

channel.

Radio

Configures the detailed RF parameters, including RF switch,

wireless mode, channel, channel bandwidth, primary channel,

supporting short protection interval, STBC mode, protection,

beacon frame interval, DTIM interval, fragment threshold,

RTS threshold, maximum associated terminals number

(maximum stations), transmission power, multicast rate, and

supported rate.

VAP

Configures the authentication mode of the virtual AP and the

related configuration.

Modes of AP

Configures the modes and IP address of the AP.

Services

Web server

Configures the http server status, HTTP server port,

maximum number of users, and timeout of the page.

NTP

Configures the NTP server status, NTP server IP address, and

NTP update interval.

Maintenance

Configuration

Restarts the AP and restores it to factory configuration;

imports and exports files.

Upgrade

Upgrades firmware of the AP.

Содержание activeARC ARC1000MAP














































Результаты поиска

Содержание activeARC ARC1000MAP

Отзывы:

AT&T activeARC ARC1000MAP, Руководство по настройке, Страница: 14 / 45

Результаты поиска

Содержание activeARC ARC1000MAP

Отзывы: