Timer
When
making or answering
a call, the timer automatically
starts. For outgoing calls
,
the timer
starts when dialing.
The screen displays the elapsed time
in minutes and
seconds (up to
59:59
) and then displays
hours and
minutes
up to 10 hours (
09:59
) before starting
at
00:00
again. The timer stops automatically when
the
line is disconnected.
When you
put
a call on hold, the
timer remains remains on the screen.
Volume
Handset/Speakerphone/Headset
Volume Control
When you are on a call, press VOLUME
+
to increase
the call
volume. Press VOLUME
-
to
decrease the
volume.
The
speakerphone has eight volume levels. The handset and
headset have four levels.
There are
three beeps when
you reach the minimum or maximum level.
Ringer Volume
The
ringer volume for each
line can be adjusted
independently.
If a LINE button has been pressed, volume adjustments will
affect the selected line. If no line is pre-selected, volume
adjustments will affect the primary line programmed
(see
Set a Primary Line
on page 14). If one line is
ringing, volume adjustments will affect the ringing line.
Press VOLUME
+
or VOLUME
-
to adjust the ringer
volume. This
telephone
has eight ringer volume levels,
including off. Each time you adjust the ringer,
there is
a sample ring indicating the volume level.
Make, Answer or End a Call
continued from page 25
Headset
Make sure the headset is plugged into the headset jack.
You will hear an error tone if you press
h
when the
headset is not plugged in.
To make a call,
press and release
h
. The
HEADSET light goes on. Wait for a dial tone,
NOTE:
If speakerphone is programmed as the default
then dial
the call. The number appears on screen
when dialing.
To answer a call,
press
h
.
To override automatic line selection,
press
h
,
then press and release a LINE button. Dial the call within
five seconds.
— OR —
Press the LINE button for the
desired line, then press
h
. Dial the call within five seconds.
mode (See
Set Preferred Mode
on page 16), you
must press
h
to activate the headset.
Switch Between Handset, Headset
and Speakerphone
To switch from handset to headset or
speakerphone,
press
h
or
K
, then replace
the handset. (In order to use the headset, it must be
firmly plugged in.)
To switch from speakerphone to handset,
lift the
handset. (Do not press
K
or the call will be
disconnected.)
To switch from headset to handset
when the handset
is in the cradle, lift the handset.
To switch from
handset to headset
when the handset
is off-hook, press
h
again.
To switch from headset to speakerphone
, press
K
.
To switch from speakerphone to headset,
insert the
headset plug into the jack firmly, and press
h
.
26
TELEPHONE OPER
A
TION
TELEPHONE OPER
A
TION
TELEPHONE OPER
A
TION
TELEPHONE OPER
A
TION
27
❚
❚
❚
0992_CIB_1ATT_FINAL_022105 2/22/04 4:46 PM Page 26
NOTE:
The phone has default distinctive ringing
for line 1 and line 2 which can not be changed.
