TELEPHONE OPERA
TION
TELEPHONE OPERA
TION
TELEPHONE OPERATION
25
Turn Caller ID with Call Waiting
On or Off
If you subscribe to combined Caller ID with Call Waiting
service from your local
telephone company, activate
this feature
in order to see call information for
Call Waiting calls.
1.
Press
E
to begin feature setup.
2.
Press
-
until the screen display includes
CALLER ID
.
3.
Press
E
. The screen display includes
AREA
CODES
.
4.
Press
-
until the screen display includes
CID-CALL WAIT
and the current setting.
5.
Press
<
or
>
to toggle between
and
.
6.
When the correct setting is shown, press
-
or
E
to save your choice. The screen display
includes
MAIN MENU
.
7.
Press
E
to return to the main Feature Setup
menu and continue setting up your
telephone
.
— OR —
Press and hold
E
to return to the idle screen.
Set the Display Language
1.
Press
E
to begin feature setup.
2.
Press
-
until the screen display includes
LANGUAGE
and the current setting.
3.
Press
<
or
>
to scroll through the language
choices (
English
,
Espanol
, or
When the
desired language
is displayed,
press
-
or
E
to save the setting.
4.
Press and hold
E
to return to the idle screen.
24
FEA
TURE SETUP
FEA
TURE SETUP
NOTE:
When making a call, the telephone uses the
Primary Line programmed (See
Set a Primary
Line
on page 14). When answering a call, it
automatically selects the ringing line.
Make, Answer or End a Call
NOTE
S
:
Handset
To make a call,
lift the handset and dial the call. The
number appears on screen
when dialing.
To answer a call,
lift the handset.
To override automatic line selection,
lift the handset,
then press and release a LINE button
.
— OR —
Press the LINE button for
the desired
line
and lift the
handset.
To end the call,
replace the handset.
Speakerphone
To make a call,
press
K
. The SPEAKER light goes
on. Wait for a dial
tone before dialing
the call. The number
appears on screen
when dialing.
To answer a call,
press
K
or press the LINE
button of the incoming call, then press
K
.
To override automatic line selection,
press
K
,
then press and release a LINE button. Dial the call within
five seconds.
— OR —
Press the LINE button for
the desired
line
and
press
K
. Dial the call within five seconds.
To end a call,
press
K
again.
NOTE:
If headset is programmed as the default mode
(see
Set Preferred Mode
on page 16), you must press
K
to activate the speakerphone.
continued on page 26
❚
❚
❚
❖
❖
❖
❙
❙
❙
❖
❖
❖
❙
❙
❙
0992_CIB_1ATT_FINAL_022105 2/22/04 4:46 PM Page 24
OFF
ON
ais
).
c
Fran
1. If one line is in use, any calls made or answered on the
other line will use the same mode (handset, speaker-
phone, or headset) already in use.
2.
If you dial a telephone number longer than 16 digits,
the screen will display only the last 16 digits.
