If CL appears in the Message Window:
You need to reset the clock.
If the system does not respond to commands from a remote
touch tone phone:
•
Make sure you are calling from a touch tone phone. When you dial a
number, you should hear tones. If you hear clicks instead, the phone is
not a touch tone telephone.
•
The answering system may not detect the Remote Access Code while
your announcement is playing. Try waiting until the announcement is
over before entering the code.
•
Make sure you enter your Remote Access Code correctly.
•
There may be noise or interference on the phone line you are using.
Press keys firmly.
If your outgoing announcement isn’t clear:
•
If you record your announcement at the base, make sure you speak in
a normal tone of voice, about nine inches from the base.
•
Make sure there is no “background” noise (TV, music, etc.) while you
are recording.
•
For best sound quality, record the announcement using the cordless
handset.
47
IN CASE OF DIFFICULTY
9355_book_1ATT 7/12/99 2:25 PM Page 47