background image

Incoming Call History

This telephone assigns each incoming call a number from 1 to 99. The
most recent call will have the highest number (for example, if 10 calls have
been received, call number 10 is the most recent, and call number 1 is the
oldest). When the call history is full, the oldest call information is deleted
to make room for new incoming call information. The screen displays 
if the caller left a message.

Memory Match

Names stored in memory will appear in your incoming Caller ID as stored
in your memory. For example, if you store your parents’ telephone number
with their name (“Mom and Dad”) in memory, the Caller ID display will
show 

MOM AND DAD

whenever you receive an incoming call from their

stored phone number.

Reviewing Call History

You can review information in the call history at any time by pressing
either 

<

or 

>

, or by pressing 

U

, then selecting 

CALL ID

. The screen

displays the number of calls in the call history and how many, if any, are
new. You can continue to use 

<

or 

>

to scroll through the call history.

The screen displays the name (if your service provides this), number, date,
and time of the call simultaneously, beginning with the most recent call.

When you reach the end of the call history, the screen displays 

END OF

LIST

. Press 

<

or 

>

to continue reviewing the call history.

To exit the review, you can press either softkey or wait 30 seconds.

Display Dial

NOTE:  

To use the Display Dial feature, you must follow the directions

for “Programming Home and Local Area Codes” in “Caller ID Feature
Setup” on page 8.

As you review calls in call history, you can dial a displayed phone number
by pressing 

on the handset. The screen displays the number

being called. If the screen displays an error indicator (for example 

Er

), you

cannot dial any displayed digits.

If the call came from your home area code, then the screen displays only
the seven digits of the number you’re calling (without an area code). When
you press 

, the phone dials the seven displayed digits. You must

program your home area code for this to work.

38

CALLER ID OPERATION

9355_book_1ATT  7/12/99  2:25 PM  Page 38

Содержание 9355




















































Отзывы: