7
Wall Installation
1
Choose a location near a modular telephone jack and a standard electrical outlet
not controlled by a wall switch.
2
Using a pencil and the template at the back of the manual, mark the wall where
you want to mount the unit.
3
Choose two #4 Round Head screws appropriate for your wall material (screws not
included). Screw in the screws until the heads are about 1/8” away from the wall.
4
Position the unit over the screws and pull down until it is firmly in place. (Adjust
the screws as necessary for a secure fit.)
INSTALLATION
Modular
Telephone Jack
#4 Round Screws
Wall Mount Template
Telephone Set Cord
Power Cord
Standard
Electrical Outlet
Telephone Line Cord
1760_book_1AT&T 5/1/00 7:38 PM Page 7
