3.
Press and release 9 9.
The system beeps once.
4.
Enter your new Remote Access code (any number between 10 and 99, except 30 or 50).
•
If a valid code number is entered, the system changes the Remote Access code and beeps twice.
•
If an invalid number is entered, or no number is entered, you hear 5 rapid beeps, followed by 2 beeps.
Repeat steps 3 and 4.
Playing Your Messages
1.
Dial your telephone number
from a touch-tone telephone.
2.
When the system answers,
enter your Remote Access code.
NOTE: To bypass the announcement, enter your Remote Access code as soon as the
announcement begins. If the announcement does not stop, enter the code again.
When the Remote Access code is entered correctly, the system announces the number of messages it has
received and beeps twice. After the system beeps, you can:
•
Wait 4 seconds, and the system automatically begins playing all of your messages.
•
Press and release 7 to begin playing all of your messages.
•
Press and release 6 to begin playing only new messages. If there are no new messages you hear five
rapid beeps.
The following options are available while you play your messages:
•
To repeat an entire message, press and release 2
while that message is playing.
•
To repeat part of a message, hold down 2.
To resume playing the message, release 2.
•
To skip an entire message, press and release 5
while that message is playing.
•
To skip part of a message, hold down 5.
To resume playing the messages, release 5.
•
To interrupt message playback, press and release #.
To resume playing messages,
press and
release 7.
•
To delete only a selected message, press and release 3 while that message is playing.
To be sure
you are deleting the right message, you can press 2 to repeat the message and then press 3 when you are
sure that the system is playing the message you want to delete.
Saving Your Messages
To save messages you’ve just heard, simply hang up the telephone. Any new messages are recorded after
the saved messages.
Replaying Your Messages
After all messages have been played and you hear “End of messages” followed by 2 beeps, press and
release 7 to replay the messages.
Deleting All Messages
If you do not want to save any of your messages, press and release 3 3 after you listen to all your messages
and hear “End of messages” followed by 2 beeps.
Recording a Memo
After you listen to your messages, you can record a memo to yourself or other members of the household.
1.
Press and release *.
2.
Begin speaking
after the beep.
3.
Press and release #
when you are finished.
This memo is counted as a new message.
Changing Your Announcement
To change your announcement:
1.
Dial your telephone number.
2.
When the system answers, enter your Remote Access code during or after the announcement.
