EN 11
INSTALLATION
Mounting
Drilling the Support surface and Fitting the Hood
• The hood support surface must be 135 mm above the bottom
surface of the wall units.
• Drill the support with a ø 4,5 mm drill bit, using the drilling template
provided.
• Cut a hole ø125 or 155 mm in size on the support surface, using
the drilling template provided.
• Fix using the 4 screws ‘12a’ (4,2 x 44,4) provided.
Fitting the cooker hood in a cupboard without shelf
• Saw a 510 x 265 cm opening in the underside of the cupboard.
• Fit the cooker hood into the opening in the cupboard using the
2 quick release skewers.
• If there is no bottom to the cupboard, fit the cooker hood using the
supplied cupboard brackets and quick release skewers.
Closing element
• The space between the edge of the hood and the rear wall can be
closed by applying the element ‘20’ provided, using the screws
supplied for this purpose.
ø 120/150
15
264
510
2x
Содержание WV60211AC
