Atag VA8117WTC, Руководство по эксплуатации

Страница: 205 / 212

Action Possible causes Problem
Clean with washing-up brush
and low foaming cleaner. Dirt around the seals and in
corners. Bad odour in dishwasher.
Run a program with a high
temperature once or twice a
month. Or run a self-cleaning
program. See Self-cleaning in
the chapter Using the
dishwasher. Low temperature programs have
been selected for a prolonged
period.
Run a self-cleaning program.
See Self-cleaning in the chapter
Using the dishwasher. The dishwasher has not been
used for a while.
Select a program with Intensive
mode. The program will use a
higher temperature to dissolve
grease on very dirty dishes. Or
run a self-cleaning program
once or twice a month. See
Self-cleaning in the chapter
Using the dishwasher. Low temperature programs have
been selected for a prolonged
period. Grease deposits in the
dishwasher.
Activate the Auto Open option. The Auto Open option is not
activated. The dishes are not dry enough.
Fully load the dishwasher. The dishwasher is not fully
loaded.
Top up with rinse aid or increase
the rinse aid dosage level. See
the chapter Settings. Rinse aid needs topping up or
dosage is set too low.
Switch all-in-one detergents or
deactivate the setting TAB and
top up with salt and separate
rinse aid. See Rinse aid in the
chapter Settings. The setting TAB is activated and
all-in-one detergent with
insufficient drying effect is being
used.
Table continued from last page
43
Troubleshooting