Atag HIDD8471LV, Инструкции по использованию и установке

Страница: 35 / 116

Appliance description
35
GB
3.1 Operating the hob with the sensor keys
The induction hob is operated with slider touch control
sensor keys. The sensor keys are operated as follows:
lightly touch a symbol on the surface of the ceramic glass
plate. A buzzer will indicate when the controls have been
operated correctly.
The touch control sensor key will then be indicated as
“key”.
ON/OFF key (7)
This key is used to switch the entire hob operational. It is,
as it were, the main switch.
Power setting display (9)
The power setting indicator shows the power setting
which has been selected, or:
.................. Residual heat
.................. Power boost
.................. Pan recognition
.................. Automatic boost function
.................. Pause function
................... Keep-warm function
................... Childproof lock
Symbols
......... Keep-warm levels 42°C/ 70°C/ 94°C
.................. Timer function, automatic switch-off device
.................. Minute minder
................. Bridging function
Lock key (10)
The lock key can be used to lock all of the keys.
Autoprograms key (11)
For melting, holding and simmering
Power boost in the sensor fi eld
The power boost setting makes additional power
available for induction cooking zones.
PAUSE key (13)
The PAUSE function can be used to briefl y stop the
cooking process.
Recall function (13) (recovery function)
The most recent setting can be recovered if the hob is
switched off unintentionally.
Fan Indication
Clean the grease fi lters
Replace / regenerate the charcoal fi lter
Automatic delay stop deactivated
Automatic delay stop activated
Fan symbols
Extraction switched on
Extraction in automatic delay stop mode
3.2 Worth knowing about the slider (sensorfi eld)
In principle, the slider functions the same as the touch
controls; the only diff erence is that you can put your
fi nger on the glass ceramic surface and then move it
around. The sensor fi eld recognises this movement
and raises or lowers the display setting (power level) in
accordance with the movement.
The term sensor fi eld is used to mean slider from now on.
What must be observed when operating sensor
fi elds?
Your fi nger should not be placed fl at onto the glass
ceramic surface in order to avoid adjacent keys/sensor
fi elds from reacting by mistake.
Press the sensor fi eld lightly or move your fi nger
around
You can press the sensor fi eld very lightly with your
fi nger; when this is done the setting on the display (power
level) will gradually change.
When you put your fi nger on the sensor fi eld and then
move it to the left or right, the display setting will change
progressively.
The faster the movement, the faster the change in the
display.
Sensor fi eld
unsuitable right
touch move