Atag HIDD8471E, Инструкции по использованию и установке, Страница: 39 / 116

Operation
39
GB
4.15 Stop function
The cooking process can be brie fl y interrupted with the
STOP function, e.g. if the doorbell rings. The STOP
function must be released in order to continue cooking at
the same power level. If a timer has been set it will pause
and will then continue.
This function is only available for 10 minutes for reasons
of safety. The hob will then be switched o
ff .
1. Pots and pans are on the cooking zones and the
required power levels have been set.
2. Press the Stop key . Instead of the selected power
settings, the interval sign will light up.
3. The interruption is ended by fi rstly pressing the STOP
key (the pause sign blinks) and then pressing
any other key (except the ON/OFF key).
The second key must be pressed within 10 seconds
as the hob will otherwise be switched o
ff .
4.16 Recall function
(recovery function)
The most recent setting can be recovered if the hob is
switched o
ff unintentionally.
The recall function only works if at least one cooking
zone is switched on.
1. The hob is inadvertently turned o
ff by the ON/OFF key
of the hob .
Within 6 seconds after turning it o ff , press the ON/
OFF key of the hob again.
The STOP key blinks.
2. Immediately afterwards, press the STOP key as
long as the pause sign is fl ashing.
The original cooking levels are restored. The cooking
process continues.
What can be restored:
• Cooking levels of all cooking zones
• Minutes and seconds of programmed timer functions
• Automatic boost function
• Power
boost
Not to be restored:
• Operation time limit (it is counted from 0)