Atag CG9271MB, Инструкция по эксплуатации

Страница: 48 / 70

GB 14
OPERATION CERAMIC
Switching off an extra zone element
The extra zone element mode is active. Beside the setting indicator
display of the cooking zone, an extra zone element icon is illuminated.
• Press the extra zone element button.
The light next to the extra zone element button illuminates.
• Press the + button and - button of the cooking zone.
• Repeat the above steps until the first zone element icon appears.
The extra zone is now switched off.
Stand-by mode
In stand-by mode, the display for each cooking zone shows ‘0.’ and the
hob is switched off.
• You can switch to stand-by from ‘Off’ mode, or by switching off the
individual cooking zones (by setting them to ‘0.’).
• In stand-by mode, the hob automatically switches off if no other
buttons are touched within 10 seconds.
Switching the hob from ‘Off’ to stand-by mode
• Touch the On/Off button.
You will hear a single beep and the display for each cooking zone
will show ‘0.’.
• You can start cooking in stand-by mode by touching the - button or
the + button for the desired cooking zone.
(Child) lock
You can secure the hob with the (child) lock. With this setting, the
hob cannot be switched on and the cooking zone settings cannot be
changed.
The (child) lock button gives you access to the following two functions:
(Standard) lock mode Child lock mode
The (standard) lock mode
prevents settings from being
accidentally changed. The child lock mode prevents
the hob from being accidentally
switched on.
All of the set cooking
processes remain active. All of the cooking zones must be
set to “0.”.