Asystems DMP8800 Скачать руководство пользователя страница 9

Страница: 9 / 44

DMP8800

English

Routing:

Each of the 8 analog inputs, 8 matrix inputs, 8

network inputs, and the stereo AES/EBU Input, can be
assigned to the DMP8800’s 8 matrix mixes� Each of the
8 matrix mixes corresponds with an output channel on
the rear of the DMP8800�

Signal Generator

The Channel Inputs and Matrix Outputs can have a

signal generator applied to them� The option can be

found in the Channel In Matrix and Mix Matrix pages

through the right click of a mouse� The signal generator

can be activated with the “ON” buttons and assigned to

the appropriate mixes using the matrix/channel select

section below the controls�
There are 4 different signals available, including White

Noise and Pink Noise – ideal for setup of systems – and

sine and sweep waves – for testing of equipment and for

general setup purposes�

Sine:

The sine wave can be selected between 20 Hz and

20 kHz� The signal level can also be adjusted, and the

signal can be turned on and off�

Sweep:

When using the sweep wave, a lowest and

highest frequency can be selected� The sweep wave will

move between these frequencies and small increments�

The hold time for each frequency can be selected by the

users� There are also controls for adjusting the signal

level and turning the sweep wave on and off�

Pink Noise:

The pink noise function includes level

controls and on/off button�

White Noise:

Like the pink noise, the white noise only

offers level controls and an on/off button�

SD Card Playback

Within the same menu as the Signal generator, through
the right click of a mouse, users can also choose to
playback MP3 files from an SD card inserted in the
SD card slot at the back of the DMP8800� Asystems
suggests formatting the cards FAT-32 for best results,
and an MP3 format with bitrate no more than 320kbit/
second is recommended� Included are play, previous,
next, pause and stop buttons�

Network Matrix

Any of the incoming input signals can be assigned directly
to the Network output mixes (up to 8 channels). The
network matrix pages are only used when the Asystems
network expansion card is installed in the DMP8800�

Attenuation:

Adjust the input level of each of the

individual input and output mixes�

Panning:

These will let you adjust the left/right mix of the

available mixes�

ALC:

This button will assign the DMP8800’s Auto Level

Control to the corresponding input (analog in, matrix in,
channel out, AES/EBU inputs).

Duck:

Pushing this button will apply the ducking feature

to the corresponding mix� The duck function can be
activated as ducker 1, ducker 2, or off, the settings of
which are decided by their respective menus�

INV

: This button will invert the phase of the corresponding

input or matrix signal�

On:

This button allows you to turn the corresponding

input signal on and off� When turned off, the signal will
not be sent to any of the matrix outputs selected�

Routing:

Each of the 8 analog inputs, 8 matrix inputs,

8 matrix outputs, and the stereo AES/EBU Input, can be
assigned to the DMP8800’s 8 network outputs� These
channels will appear as Network Input connections in any
networked Asystems DMP or DMA matrix devices�

AES/EBU Matrix

These pages allow for detailed assignment and mixing
of the final stereo mix sent out of the digital AES/EBU
outputs�