ASV 0404-766, Руководство по эксплуатации и обслуживанию

Страница: 76 / 95

7 MAINTENANCE
74
7.3 Maintenance Intervals
7.3.1 Daily Maintenance Tasks
7.3.2 50-1000 hour Tasks
Page
1 Check hydraulic oil level (figure 7.7-3, p-78) 78
2 Check engine oil level 76
3 Check fuel level (gauge screen in Operator Interface) 37
4 Check track tension / condition 81
5 Check accessory belt for presence / tension / condition 79
6 Check for proper control operation 40
7 Check safety circuit for proper operation 55
8 Check for proper switch and lighting operation 37
9 Check display for air filter fault message, service as required 84-85
10 General visual check for cracks, damage, completeness 20,55
11 Check for leaks in hoses, tubes, valves, pumps, cylinders, etc. 18,27,55
12 Check display for water in fuel fault message, drain as required 80
13 Lubricate all grease points 75
14 Inspect / clean the coolers and engine compartment / chassis 86-87
15 Inspect / clean undercarriages (as needed) 81
16 Inspect / replace missing / damaged safety signs 12,13
Daily
Page
1 Inspect drive sprocket rollers (replace as needed) 83
2 Replace engine oil and filter (initial break-in service only) 77
Page
1 Replace hydraulic filter(s) 79
2 Check accessory belt(s) tension / condition (A/C if equipped) 79
Page
1 Replace engine oil & filter 77
Page
1 Replace fuel filter elements 80
Page
1 Replace hydraulic oil 78
2 Replace engine coolant (use SCA additive, see engine manual) 86
Page
1 Replace oil separator element 88
Every 1500 operating hours
Every 50 operating hours
Every 250 operating hours
Every 500 operating hours
Every 1000 operating hours
Every 400 operating hours
RT-40 US O&M
0404-766 2019-05