ASV 0404-766, Руководство по эксплуатации и обслуживанию

Страница: 42 / 95

4.3 Controls
The RT-40 has two hydraulic
pilot joystick controls. The
joysticks are used to control
machine speed and direction
as well as lift arm and buck-
et functions.
4.3.1 Lift Arm Control
The lift arm joystick is used
to control the lift arms, buck-
et, and to engage the float
function. The illustration
shows the relationship
between joystick movement
and resulting lift arm action.
Note: To activate the float function, move the joystick fully forward in a quick
motion. The joystick will then be held in detent by the magnet attached to the joy-
stick base. Pull back quickly to disengage the float function.
4.3.2 Drive Control
The drive joystick controls the direction and speed of the machine. The illustration
above shows the relationship between joystick movement and resulting machine
motion.
4.4 Throttle
The throttle (twist knob) is located on the right side of the dash panel when
seated in the machine. The throttle controls engine rpm.
•
Twist the throttle clockwise to increase engine RPM.
• Twist the throttle counter-clockwise to decrease engine RPM.
• Select a lower rpm for work that requires delicate operation of
the machine.
• Select a higher rpm for faster travel speed or when more
power or hydraulic flow is required for a task.
4 MACHINE DESCRIPTION / CONTROLS
40
RT-40 US O&M
0404-766 2019-05