ASV 0404-766, Руководство по эксплуатации и обслуживанию

Страница: 16 / 95

2.4 General Safety Notes
• It is the responsibility of the operator to be aware of his/her surroundings at
all times.
Keep a safe distance from bystanders at all times during
operation. Always look in the direction of travel.
• Read and understand all safety signs, the operator’s manual and the AEM
safety manual for this type of equipment prior to operation.
• If safety signs are obstructed by dirt or debris, clean them using mild soap
and water prior to operation. DO NOT use solvent based cleaners, as they
may damage the safety sign material.
• If safety signs are damaged or illegible, replace them immediately, prior to
operation.
• Never jump off of the machine. Instead use the hand holds and step
designed for entering and exiting the machine. Face the machine and use
three points of contact (defined as: one foot and two hands, or one hand
and two feet) to ensure your safety.
• Ensure the access system (step and handholds) are clean prior to entering
or exiting the machine.
• Do not use any method of operation, inspection, or maintenance that may
impair safety.
• This machine is only to be used when properly equipped for the task to be
performed and when properly inspected and maintained to ensure safe
operation.
• The manufacturer’s instructions regarding operation, inspection, mainte-
nance, repair and transportation
must be followed.
• Never place the machine into operation without having first performed a
thorough walk-around inspection and making any necessary repairs or
adjustments.
• Safety devices on the machine shall not be deactivated or removed.
• Do not make any changes, additions or conversions to the machine that
could have a negative effect on safety without the manufacturer’s written
approval.
• It is the responsibility of the operator to communicate intentions for
work (machine movement) to anyone standing or working nearby, prior to
operation.
14
2 SAFETY
RT-40 US O&M
0404-766 2019-05