ASUSTOR NAS Quick Installation Guide
d.
Under the [Networking] tab select [Internet Protocol Version 4 (TCP/IPv4)]
and click on [Properties].
e.
Under the [General] tab select the [Use the following IP address] radio button.
Set the [IP address] to 169.254.1.1 and the [Subnet mask] to 255.255.0.0
and then click on [OK].
f.
Open up ASUSTOR Control Center to scan for your NAS.
4.
If the above mentioned procedures have not managed to solve your problem, please
contact your local ASUSTOR dealer or ASUSTOR Customer Service
).You are also encouraged to browse through the
Page 25 of 25
